FACE PLATES

SURFACE MOUNT BOX

• Twin adhesive tape and mounting hardware are included  
• ABS UL94V-0 thermoplastic material   
• 25 years warranty

JACKS

iCAT-ITS offers the highest performing jacks in the industry.  Whether Category 5e, Category 6 or the newly released Category 6a for 10 Gigabit, you can always rely on iCAT-ITS for a fast and easy installation.

Our keystone jacks are individually terminated using 110 Insulation Displacement Connectors (IDC) with punch down cap for quick installation and clean finish. Each package contains user instructions and basic wiring layouts for standard configurations of 568A and 568B.

Keystone Jacks come with T568A or T568B wiring and comply fully with TIA/EIA-568-B.2-1 specifications for Insertion loss (Attenuation), Near-end crosstalk (NEXT) loss, Return loss, and Far-end crosstalk (FEXT) loss for any pair combination up to 250 MHz.

Specification:
UL & 3P Certified, Patented, meets FCC parts 68, meets TIA/EIA-568-B.2-1: Cat 5e and Cat 6 transmission performance.  Our IDC requires no conductor pre stripping.

Electrical:
Current Rating: 1.5 Amps, Insulation Resistance: 500 Mega-ohm minimum, Contact Resistance: 20 Milli-ohm maximum, DC Resistance: 0.1 ohm maximum, Exceed Category 5e Requirements Specified in TIA/EIA-568-B.2, Data Transmission Rates up to 1,000Mbps.

Mechanical:
Plug Insertion Life: 750 cycles minimum, Plug & Jack Contact Force: 100 grams minimum using FCC approved plug, Plug Retention Force: 30 lbs minimum, Temperature: -40°F to 150°F

Physicals:
Housing: High Impact flame retardant plastic, UL 94V-0 rated, Jack Wiring: 50 micro inch of gold over 100 micro inch of nickel, Connector: Insulation Displacement Connector (IDC) accept 24~26 AWG solid wire.

Application:
10BASE-T, 100BASE-T, 1000BASE-T, 10GBASE-T or others.

CABLES

iCAT-ITS ANSI/TIA/EIA 568A compliant Cat 5e UTP cables are best for mission critical LAN applications.  iCAT-ITS cables are rated to 350MHz, Powersum NEXT tested and are manufactured at our UL and BSI Certified ISO-9002 state-of-the-art manufacturing and testing facility.

CLICK HERE TO VIEW FULL CAT 5e PRODUCT SPECS

This Cat 6 UTP CMR PVC cable can potentially transmit data at rates several times faster than Cat 5e cables. It is designed with headroom for tomorrow's emerging high-speed LAN technologies.

CLICK HERE TO VIEW FULL CAT 6 PRODUCT SPECS

PATCH PANELS

Easy access and ease of installation makes our patch panels the perfect choice.  The modular patch panels utilize our quad frame modules and are offered with 8-position 8-wire inserts wired to 110 terminal blocks. The products meet or exceed all requirements set forth in Telecommunications Industry Association/Electronic Industries Alliance standard (TIA/EIA-568-B.2) when using UTP cabling rated to 100 MHz.

Application:
The modular quad frames to 110 patch panels are most commonly used at the cross-connect area for interfacing system side patch panels as well as network switches to the distribution side of the network. The patch panels allow savings by eliminating intermediate components and labor at the cross-connect. All versions can be mounted on 19" EIA racks.

Features:

• Meet & Exceed TIA/EIA-568-B.2 Category 6 and 5e connecting hardware specification.
• Certified by UL.
• Using snap-on type Frame, no need for any screws on front side of panel.
• 110E & 110K type IDC termination. It allows connection with 22-26 AWG wires.
• Colored Fame to avoid confusion each time you need to re-assign your network wiring.

110 BLOCKS

When customers need crystal clear communications, you can rely on our 110 compatible products. 

110 Connecting Block
The 110 Connecting Blocks utilize double-ended Insulation Displacement Contacts (IDC) that terminates 22-26 AWG solid or stranded conductors. The blocks are available in 3, 4 and 5-pair sizes with the appropriate color-coding.

110 Wiring Manager
The 110 Wiring Managers are fire-retardant molded plastic frames, which serve as a horizontal cable management for routing of patch cords and cross-connect wire.

110 Wiring Block - Cat 6     spec sheet download
The 110 Wiring Blocks accept 22-26 AWG conductors. Blocks are available in 32, 64, 128 and 192-pair sizes with legs for backboard mounting. Wiring Blocks without legs in 32 and 64-pair sizes are also available.

110 Wiring Block - Cat 5e
The 110 Wiring Blocks accept 22-26 AWG conductors. Blocks are available in 50, 100, 200 and 300-pair sizes with legs for backboard mounting. Wiring blocks without legs in 50 and 100-pair sizes are also available.

PATCH CORDS

cat 5 spec sheet download

cat 6 spec sheet download

Reliability and versatility are just two reasons to use iCAT-ITS patch cords.  We offer plugs in standard configurations to terminate modular cords for patching or workstation applications. Modular cords can be terminated to the exact length needed for neater, more organized installations. The plugs terminate 24~26 AWG (0.51mm~0.40mm) solid or stranded wire.

UTP Series
Our unshielded twisted-pair patch/ line cords (unscreened) are constructed out of 4-pair cable with modular plugs crimped on both ends.  Get a high performance alternative to satin modular line cords where crosstalk, EMI, or distance may be considerations.

Cable consists of pairs of 24 AWG (0.51mm) wires, each pair twisted at a rate varying between 2 to 12 twists per foot. Jacket material is either PVC or FRD construction in solid conductor cords. PVC for stranded cords only. 

TESTERS

Cost efficient and portable, the dual RJ-45 components perform accurate testing of on-site cabling and patch cords. Shielded RJ45 and BNC are included on both units. Units may be separated for site cable testing and then reattached for patch cord testing.

To test, simply attach the tester device to each end of the cable to be tested. Test results for each pair are displayed on one of five dual LEDs. 

Indicates: Open, Shorts, Reversed wires and Crossed pairs.

Requires one 9V battery. 
Weight: 0.2 kg 
Tests shielded and unshielded RJ45 patch cords.

• Tests for both TIA-EIA-T568A and T568B